top of page

Load data for .360 BUCKHAMMER + .357 | 110gr | Impala LWFP KS

Recommended Powder(s): Vihtavuori N110

.360 BUCKHAMMER + .357 | 110gr | Impala LWFP KS

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.357 | 110gr | Impala LWFP KS
Bullet Weight:
110gr | 7.1g
Bullet Diameter:
0.357" | 9.07mm
Bullet Length:
0.673" | 17.1mm
Caliber:
.360 BUCKHAMMER load data
Case Length (l3):
1.800" | 45.7mm
Cartridge Length (C.O.L.):
2.462" | 62.5mm
Seated Depth:
0.010" | 0.3mm
Shank Seated Depth:
0.010" | 0.3mm
Case Capacity:
44.2 Grains of Water | 2.87 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
49995 psi | 3447 bar
LID:
LID_B3005_C1353
Last updated:
2025-01-01

Load data for 20 loads in caliber .360 BUCKHAMMER with .357 | 110gr | Impala LWFP KS bullet and 10 powders such as Vihtavuori N110. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
92%
44034
88%
**33
97%
Accurate No. 11 FS
<<locked>>
91%
44440
89%
**22
95%
Hodgdon LilGun
<<locked>>
88%
44976
90%
**56
100%
Hodgdon TrailBoss
<<locked>>
95%
24598
49%
**54
100%
[IMR 4227]*
<<locked>>
96%
38653
77%
**94
91%
Lovex S040
<<locked>>
85%
43932
88%
**66
100%
Lovex S053
<<locked>>
96%
36680
73%
**90
95%
ReloadSwiss RS 14
<<locked>>
97%
24352
49%
**09
100%
SNPE Vectan BA6 1/2
<<locked>>
97%
34127
68%
**56
100%
Vihtavuori N110 👍
<<locked>>
96%
43221
86%
**25
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
<<locked>>
81%
31778
64%
**44
93%
[Accurate No. 11 FS]*
<<locked>>
81%
32779
66%
**59
91%
Hodgdon LilGun
<<locked>>
81%
35882
72%
**72
100%
Hodgdon TrailBoss
<<locked>>
81%
19870
40%
**16
100%
[IMR 4227]*
<<locked>>
94%
36013
72%
**25
90%
Lovex S040
<<locked>>
81%
38667
77%
**61
99%
[Lovex S053]*
<<locked>>
84%
25686
51%
**75
90%
ReloadSwiss RS 14
<<locked>>
81%
19261
39%
**49
100%
SNPE Vectan BA6 1/2
<<locked>>
81%
23090
46%
**34
97%
Vihtavuori N110
<<locked>>
81%
28282
57%
**64
98%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page